Features of Digital Hand Held Leeb Hardness Tester with Integral Thermal Printer
1.On-Board memory holds 500 groups of data
2.Automatic identification Impact Devices and test direction (Except G impact device)
3.Equipped with integral thermal printer,
4.Li Battery , low voltage indication and sound alarm
5.Dataview for PC operation
6.Upper / lower limits setting and sound alarm
7.Six impact devices available for different application *
Large LCD with back-light, showing all functions and parameters
8.Direct display of hardness scales HRB, HRC,HV, HB, HS, HL
9.Conversion to tensile strength (U.T.S.)
10.Wide measuring range
Standard configurations of Digital Hand Held Leeb Hardness Tester with Integral Thermal Printer
Main unit
Impact Device type D
Test block HLD
Charger
Brush
Connecting cable
TIMES certificate
Instruction manual
Parameter of Digital Hand Held Leeb Hardness Tester with Integral Thermal Printer
| Measuring Range | (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(30-100)HS,(59-85)HRA(13 -100)HRB |
| Measuring Direction | HL,HB,HRB,HRC,HRA,HV,HS |
| Indicating Error | HLD:±5; HRC:±1; HB:±4 |
| Memory | 100 Groups test maximum |
| Printer | Built-in Printer |
| DOS shell Material | Plastic |
| Statistics | Average value, min-max ,upper-lower limits |
| Data-Output | USB1.0 to Hyperterminal (MS) |
| Impact Device | D (standard) |
| Optional impact Devices | DC/D+15/DL/G/C/E |
| Dimension | 212mm×72mm×30mm |
| Power Supply | 6V,500mA(1.8VA), A2.5-4 hours |
| 125<HBW≤225 | 0 ºC to 40 ºC |
| Weight | 220g (Excluding impact device and printer) |
